Begin a commission

Cut in metal. Written in light.

Architectural screens, façades, column covers, gates and illuminated columns, designed and fabricated under one roof in Brampton, Ontario.

Fan Flora in raking daylightMove your cursor to move the sun.

Every panel begins as a drawing and ends as light on a wall. Between the two, nothing leaves our building: design, laser cutting, forming, welding and finishing all happen under one roof.

A 59 by 119 inch sheet drawn to scale beside a 5 foot 10 inch figure 119 in 59 in 5 ft 10 in
Our largest sheet, drawn to scale. Panels larger than one sheet are joined and framed to your drawings.

Seven families, one workshop.

Each family is made to order. A library pattern is the starting point; size, material, finish and mounting follow your drawings.

A white building corner clad in Diamond Current perforated panels

Façades and walls

Patterned and perforated cladding for vertical surfaces, interior or exterior.

Diamond Current as building cladding

Backlit column covers cut with the Cellular Flow pattern in a restaurant

Column covers

Round, square, oval and racetrack sections, dimensional or luminous.

Cellular Flow, backlit

Tall backlit Fan Flora screens behind a hotel lobby seating area

Dividers and screens

Single or multi-layered partitions that add depth to lobbies, restaurants and offices.

Fan Flora in a hotel lobby

Black pedestrian gate cut with the ornamental Majestic Crest pattern

Gates, fences and railings

Privacy screens, fence panels and toppers, gates and railing infill, usually in aluminum.

Majestic Crest pedestrian gate

Tall windows fitted with white laser-cut inserts that filter daylight

Door, window and cabinet inserts

Inserts for entry doors, sidelights, transoms, feature windows, kitchens and millwork.

Window inserts, 1.5 to 3.0 mm

Two Lumina light columns, one black with a cut logo, one stainless with a peacock feather pattern

Lumina lighting

Light columns and illuminated bollards in stainless steel.

Peacock Feather and a cut logo

Stainless steel table with a flourish pattern glowing through its sides

Furniture

Tables and seating with laser-cut bases, sides and tops.

Classic Flourish, lit from within

Every family can carry any pattern in the library, or one drawn for your project.

Try a pattern
Curved column covers and benches lit from within, cut with the S-Wave line pattern, at a building entrance at night

After dark, the pattern becomes the light.

S-Wave on luminous column covers and benches

Pattern atelier

Fourteen signatures from a library of more than 5,000. Choose a pattern, a material and a finish, then move through the day to see the shadow it casts and, after sunset, the light it gives.

Fan FloraPergola roofs, corridor and lobby screens

8:10 amMorning
Material
Finish
Plate

Fan Flora in stainless 316, brushed, 3/16 in plate.

Powder coat colours shown are examples; colour is matched to your project.

The full library spans abstract, classic, geometric, modern, illusion, floral, botanical, marine and wildlife designs. Any pattern can be adjusted for scale, border width, density, open area and privacy, or drawn from a logo, monogram or your own artwork.

Request the full library

Lumina

Light columns and illuminated bollards

Stainless steel columns that turn a pattern into light along paths, entrances and forecourts. Choose a Lumina design, or have a logo, a house name or a street number cut into the body.

  • Peacock Feather
  • Classic Arabesque
  • Floor Blossom
  • Modern Mosaic
  • Natural Leaf
  • Geometric Mosaic
  • Honeycomb
  • Diamond Wave
  • Radiant Bloom
  • Flowing Wave
Ask about Lumina
Four Lumina columns: a square stainless column with a chevron cut, a black column with a cut logo, a stainless column with peacock feathers and a round stainless bollard
Square and round sections in premium stainless steel
Lumina standard heights Seven columns on a 6 by 6 inch section, 13, 19, 25, 26, 34, 42 and 80 inches tall, drawn to scale against a 6 foot line.
Standard heights on a 6 × 6 in section, drawn to scale against a 6 ft line. Size, shape and pattern can all be made to suit the project.
Lumina columns lighting a curved path beside a restaurant terrace and waterfall
Natural Leaf along a terrace path
Round Lumina bollards lining a red carpet at an evening event
Honeycomb bollards at an entrance
Lumina columns lighting a stone path to a palace-style hotel at sunset
Peacock Feather on a hotel approach

In place

How the library reads at full scale, from a front gate to a mountain lodge.

A modern house at dusk behind a low wall fitted with swirling Uzu-Karakusa panels and a matching gate
Uzu-Karakusa wall and gateResidential
Angled façade fins cut with the Cosmic Mandala pattern in front of a glass building
Cosmic Mandala façade finsCommercial
An office reception with a black Wave Orbit partition of interlocking curves
Wave Orbit partitionWorkplace
A pergola roofed with Fan Flora panels above a dining terrace at dusk
Fan Flora pergola roofOutdoor living
A mountain chalet terrace screened by four Solar Canopy panels showing a tree and sunburst
Solar Canopy window screenHospitality
A riverside lodge lounge with a three-panel Rustic Harmony wall piece
Rustic Harmony triptychHospitality
A wide driveway gate with a large butterfly and floral cut-out
Garden Grace driveway gateResidential
A cycle-path shelter with angled supports and Diamond Current infill panels
Diamond Current shelter infillPublic realm

From file to finish

Every stage runs in-house at our Brampton facility. Owning each step gives us direct control over quality, lead times and customization.

  1. 1

    Design

    Our design team develops or adapts the pattern, then checks web widths, open area, panel size and mounting points before anything is cut. Very intricate patterns are adjusted to keep enough strength between cuts.

    CAD and DXFCustom artworkLogos and monograms
  2. 2

    Cut

    Sheet and tube lasers cut plate from 1/8 to 3/8 in, on sheets up to 59 × 119 in, and inserts from 1.5 to 3.0 mm.

    Sheet laserTube laser
  3. 3

    Form

    Panels are rolled into curves for column covers and bent into tabs, flanges and returns for mounting.

    RollingPress brake bending
  4. 4

    Weld

    MIG and TIG welding join panels into gates, frames, columns and furniture.

    MIGTIGWelded frames and posts
  5. 5

    Finish

    Multi-stage powder coating built for UV, moisture and changing weather, or galvanized, brushed, satin, polished and specialty finishes.

    Powder coatGalvanizingStainless finishes
Sheet laser cutting machine with its shuttle table
Sheet laser
Tube laser cutting machine
Tube laser

For architects and specifiers

Send architectural or shop drawings, CAD or DXF files, sketches, reference images or artwork. We take it from design intent to a panel that is engineered, finished and ready to mount.

  • Design development

    Our in-house team develops, modifies and customizes patterns, from concept to production-ready cutting files.

  • Material and finish

    We recommend material and thickness for the location, exposure, structure, design intent and budget.

  • Engineering review

    Web widths, open area, unsupported spans, glass clearance and thermal expansion are checked before cutting.

  • Mounting

    From pre-drilled panels and welded frames to concrete inserts and exterior cladding systems, built to your engineer's specification.

Aluminum

Our usual recommendation outdoors: privacy screens, fences, gates, railing infill and large panels. Lightweight and corrosion resistant; it won't rust.

Powder coat

Mild steel

Rigid and cost-effective for detailed patterns, interior features and structural work.

Powder coat, galvanizing

Stainless 304 and 316

Where corrosion resistance, durability and a premium surface are required.

Brushed, satin, polished, natural, powder coat, specialty

Brass

Decorative architectural and interior pieces.

Specialty finishes

Mounting options

APre-drilled holes around the perimeter
BCountersunk holes around the perimeter
CTabs bent 90° on the edges
DFlange bent 90° on the sides
EL-brackets along the full length

Add square posts with welded base plates, extended posts for concrete, welded frames or ¾ in standoff caps. Larger projects can use concrete inserts, welded base plates and exterior wall-cladding systems.

Who we work with

Architects, interior designers, general contractors, custom home builders and developers; door and window manufacturers, millwork companies, cabinet makers and glazing contractors; and homeowners with a project in mind.

Residential, commercial, hospitality, retail and financial projects.

Made in Canada, start to finish.

We source domestic raw materials and manufacture locally, so the work and the investment stay in Canada.

“Keep Canadian dollars in Canadian pockets.”

Lifetime warranty on premium product lines

Begin a commission

Tell us what you're designing. Drawings, a sketch or a reference image are all a good place to start.

39 Selby Road
Brampton, Ontario L6W 1K5

+1 905 487 3472
info@signaturelaserart.com
Project type

Opens your email app with the brief filled in, so you can attach drawings before sending.